This compact and reliable air blower from Wonsmart is the perfect solution for household appliances that require steady air flow and pressure. With a voltage of 24VDC and a current range of 3.5-7.5A, this blower can deliver up to 7 kpa air pressure and an air flow of 100m3/h. Its ring-shaped outlet makes it ideal for coffee bean roasters and other small-scale machines.
1.Product Introduction
Part No | WS10690-24-200-X300 |
Vlotage | 24VDC |
At Max airflow | |
Speed | 20,000rpm |
Current | 7.5A |
Air flow | 100m3/h(58.8CFM) |
Noise | 86dba |
At Max air pressure | |
Speed | 25,000rpm |
Current | 3.5A |
Air Pressure | 7Kpa |
Noise | 90dba |
2.Product Parameters
Motor type | Three Phase Brushless |
Bearing type | NMB Ball bearing |
Insulation Class | Class F |
Protect Class | IP54 |
Operating Temperature range | -20℃ ~ +60℃ |
Life MTTF | 15,000hours |
Hall Sensor | 120 |
Speed @Hall sensor frequency | 1HZ=30r/min |
Driver Type | External Driver |
Product Weight | 365g |
24V version choose 24VDC-8A power supplier |
Pin 1 | Red | +5 V |
Pin 2 | Purple | Hall A |
Pin 3 | Green | Hall B |
Pin 4 | Grey | Hall C |
Pin 5 | Black | GND |
Pin 6 | Yellow | Phase A |
Pin 7 | Blue | Phase B |
Pin 8 | White | Phase C |
Notes:
1.Do not use max pressure ad working point,this point is not safe since airflow is too small
2.To add a filter onto the inlet can make the blower run longer time
3.The right impeller run direction is CCW
overall size(w*h):107.5*77.5mm
inlet size:φ30mm
line's length:200mm
WS10690-24-200-X300 blower can reach maximum 100m3/h airflow at 0 kpa pressure and maximum 7kpa static pressure. It has maximum output air power when this blower run at 0kpa resistance if we set 100% PWM.
Other load point performance refer to below P-Q curve:
1. The Wonsmart centrifugal blower in the WS10690-24-200-X300 model is a high-quality air blower that operates on a 24VDC voltage.
2. With a low current range of 3.5-7.5A, this blower is energy efficient and consumes minimal power.
3. It generates a high wind pressure of 7 kpa and produces a strong airflow of 100m3/h.
4. This blower is suitable for use in home machines like coffee bean roasters due to its circular air outlet design.
5. Invest in the Wonsmart centrifugal blower to experience reliable and efficient air flow in your home appliances.
![]() | ![]() | ![]() | ![]() | |||||
Part No. | WS7040-24-V200 | WS9250-24-24-X200 | WS4540-12-NZ03 | WS145110-48-150-X300 | ||||
Size | 70mm*40mm | 92mm*50mm | 45mm*40mm | 145mm*110mm | ||||
Voltage | 24VDC | 24VDC | 24VDC | 48VDC | ||||
Max.Air flow | 25.5m3/h | 57m3/h | 7.2m3/h | 33m3/h | ||||
Max.Air pressure | 6.5Kpa | 8.5Kpa | 5Kpa | 32Kpa |
Q:Are you factory or trading company?
A:We are factory with 4,000 square meters and we have been focus on high pressure BLDC blowers for more than 10 years
Q:Can you design a new blower fan if we give you target performance?
A:Yes, we offer ODM service for both blower fan and controller board
Q:Can we connect this centrifugal air blower directly onto power source?
A:This blower fan is with BLDC motor inside and it needs a controller board to run.
Q:What kind of power source shall we use to drive this blower fan?
A:Generally, our customers use 24vdc switching power supply or Li-on battery.
Q:Do you also sell controller board for this blower fan?
A:Yes, we can supply adapted controller board for this blower fan.
Q:How to change impeller speed if we use your controller board?
A:You can use 0~5v or PWM to change speed. Our standard controller board is also with a potentiometer to change speed conveniently.
Q:What is the MTTF of this centrifugal air blower?
A:MTTF of this centrifugal air blower is 20,000+ hours under 25 C degree.
Q:Can we use this centrifugal air blower to suct water?
A:This blower fan can not be used to suck water. If you need to suck water, you can ask us to choose proper item for this special working condition.
Q:Can we use this centrifugal air blower to suck dust directly?
A:This blower fan can not be used to suck dust directly.If you need to suck dust, you can ask us to choose proper item for this special working condition.
Q:What can do if the working condition is dirty?
A:A filter is strongly recommended to assemble onto the the inlet of the blower fan
LEAVE US A MESSAGE
Ningbo Wonsmart Motor Fan Company is a professional manufacturer with a focus on small sized brushless dc motors and brushless dc blowers.